Tascam DR-680 Owner's Manual

Also see for DR-680: Comparison chart Owner's manual addendum Owner's manual Release notes Notice

Contents

Tascam DR-680 Owner's Manual Manual pdf 49 page image

TASCAM DR-680 49Initializing the unitUse the INITIALIZE item to restore the varioussettings of this unit to their initial settings.When selecting Exec item, press the ENTER keyto open a confirmation screen.Press the ENTER key to initialize the unit. Pressthe STOP key to cancel initialization.After completing or canceling initialization, theSYSTEM menu screen reopens.Viewing system informationUse the INFORMATION item to view information aboutthe unit’s system settings and the firmware version.Press the ENTER key to open the system infor-mation screen.This page shows information about the systemfirmware version.When the INFORMATION screen is open, press theENTER key to return to the SYSTEM screen.Reformatting SD cardsYou can reformat an SD card that is in the unit.CAUTIONIf you format a card, all information, including takes•and folders, on it is erased.When formatting, use the AC adaptor or confirm•that the remaining battery charge is sufficient. If thebatteries run out of power during this operation, theformatting might not be completed correctly.1 Press the MENU key to open the MENU screen.2 Use the DATA wheel to select the CARD menu item,and press the ENTER key to open the CARD menuscreen.3 Use the DATA wheel to select the FORMAT item,and press the key or ENTER key to open thefollowing screen.4 Press the ENTER key to open a confirmationscreen.5 Press the ENTER key again to start formatting.6 When formatting completes, the CARD screenreopens.9 – Other Settings and Information Display