Tascam HS-4000 Owner's Manual

Also see for HS-4000: New features Owner's manual Release notes

Contents

38 TASCAM HS-40005 – ProjectsRebuilding sessionsRebuilding a session makes it possible to play back files thatwere not recorded by this unit, including files that have beencopied between session folders on the unit and audio files thathave been copied to a CF card session folder from a computer.These files will be indexed by this unit.1. Press the PROJECT key on the front panel to open thePROJECTscreen.2. Touch the e button for the project that contains thesession that you want to rebuild to open the sessionselection screen. If it is not the current project, apop-up window appears confirming that you want toload it. Touch the OKbutton.3. Select the session that you want to rebuild.Touch the MULTISELECTbutton to enable the selection ofmultiple sessions.4. Touch the MENU button on the session selectionscreen to open a pull-up menu.One session selectedMultiple sessions selected5. Touch the REBUILDbutton in the pull-up menu.6. Touch the OK button or press the DATA dial when aconfirmation pop-up message appears.During rebuilding, a progress status pop-up appears.When rebuilding completes, the pop-up disappears.NOTEYou can also rebuild a session from that session’s take selection screen.Copying sessionsYou can copy session folders between CF 1 and CF 2 (two CFcards are necessary). When you copy a session, the samedirectory structure is created at the copy destination.NOTE・ To play copied session on this unit, you must rebuild the destinationproject or session.・ If you copy a session with a different sampling frequency into a project,the session cannot be rebuilt.1. Press the PROJECT key on the front panel to open thePROJECTscreen.2. Touch the e button for the project that contains thesession that you want to copy to open the sessionselection screen. If it is not the current project, apop-up window appears confirming that you want toload it. Touch the OKbutton.3. Select the session that you want to copy.Touch the MULTISELECTbutton to enable the selection ofmultiple sessions.4. Touch the MENU button on the session selectionscreen to open a pull-up menu.One session selectedMultiple sessions selected5. Touch the COPYbutton in the pull-up menu.6. Touch the OK button or press the DATA dial when aconfirmation pop-up message appears.During copying, a progress status pop-up appears.When copying completes, the pop-up disappears.NOTEIf a session with the same name already exists on the destination CF card, amessage confirming that you want to overwrite the existing one appears.Touch the OKbutton or press the DATA dial to overwrite the existing file andcopy the selected session to the destination.