Tascam US-366 Owner's Manual

Also see for US-322: Quick start guide Quick start guide

Tascam US-366 Owner's Manual Manual pdf 24 page image

24 TASCAM US-322/3665 – Using the US-322/366 Mixer PanelResetting settings to their default valuesIf you want to reset all the current settings to their originalvalues, You can restore the mixer and effect settings to theirfactory defaults.8 Resetting the mixerFollow these procedures to reset the mixer and output channelsettings.1. Click “File (F)” in the toolbar on a Windows PC or click“TASCAM US-322 US-366 Mixer Panel” in the menu bar on aMac to open a pulldown menu.2. Click “Mixer Reset...” in the pulldown menu.3. When a warning appears as shown below, click “OK”.CAUTIONAfter resetting, you cannot restore the previous settings.Before clicking “OK”, confirm that you want to reset thesettings.NOTEClick “Cancel” to return to the Mixer Panel without resetting.The mixer and other settings are reset to their default values.The items reset and their default values are as follows.“MIXER” page itemsi Dynamics effect: Offi Dynamics effect assignment: Offi Send effect signal position setting (all channels): POSTi Send level (all channels): 0 (–inf )i Solo (all channels): Offi Mute (all channels): Offi Pan slider (all channels): Centeri Fader (all channels): 0 dBi Link (all channel pairs): Offi Send effect: REVERB ONi Send/return levels: 0 (–inf )“INTERFACE” page itemsUS-322MULTITRACK modei LINE OUTPUTS 1-2: mixer output L-RSTEREO MIX modei LINE OUTPUTS 1-2: mixer output L-RUS-366MULTITRACK modei LINE OUTPUTS 1-2: mixer output L-Ri DIGITAL OUTPUTS: computer 1-2i LINE OUTPUTS 3-4: computer 3-4STEREO MIX modei LINE OUTPUTS 1-2: mixer output L-Ri DIGITAL OUTPUTS: mixer output L-Ri LINE OUTPUTS 3-4: computer 1-28 Resetting the effectsFollow these procedures to reset all the effects, including theone currently shown, to their default values.1. Click “File (F)” in the toolbar on a Windows PC or click“TASCAM US-322 US-366 Mixer Panel” in the menu bar on aMac to open a pulldown menu.2. Click “Effect Reset...” in the pulldown menu.3. When a warning appears as shown below, click “OK”.CAUTIONAfter resetting, you cannot restore the previous settings.Before clicking “OK”, confirm that you want to reset thesettings.NOTEClick “Cancel” to return to the Mixer Panel without resetting.The effect settings are reset to their default values.The items reset are as follows.COMPRESSORTHRESHOLD, RATIO, ATTACK, RELEASE, GAINNOISE SUPPRESSORTHRESHOLD, SUPPRESSION, ATTACK, RELEASEDE-ESSERFREQUENCY, DEPTHEXCITERFREQUENCY, DEPTHEQGAIN and FREQ for all bands (LOW, MID, HIGH) and MIDband QREVERBROOM TYPE, PRE DELAY, REVERB TIMENOTEThis does not change the effect on/off status or theassignment of the dynamics effect. These items are restoredto their defaults by resetting the mixer.See the “Effect explanations” for the default settings of eacheffect.