Part No. 237062 Z-45/25 Bi-Energy • Z-45/25J Bi-Energy 5 - 1September 2015 Section 5 • Fault CodesBefore Troubleshooting:Read, understand and obey the safety rules andoperating instructions in the appropriateOperator’s Manual on your machine beforeattempting any maintenance or repair procedure.Be sure that all necessary tools and testequipment are available and ready for use.Read each appropriate fault code thoroughly.Attempting shortcuts may produce hazardousconditions.Be aware of the following hazards and followgenerally accepted safe workshop practices.Crushing hazard. When testingor replacing any hydrauliccomponent, always supportthe structure and secure itfrom movement.Electrocution/burn hazard. Contactwith electrically charged circuitsmay result in death or seriousinjury. Remove all rings, watchesand other jewelry.Note: Perform all troubleshooting on a firm levelsurface.Fault CodesObserve and Obey:Troubleshooting and repair procedures shall becompleted by a person trained and qualified onthe repair of this machine.Immediately tag and remove from service adamaged or malfunctioning machine.Repair any machine damage or malfunctionbefore operating the machine.Unless otherwise specified, perform eachrepair procedure with the machine in thefollowing configuration:• Boom in stowed position• Turntable rotated with the boom betweenthe non-steer wheels• Key switch in the off position with thekey removed• Wheels chocked• All external AC power supply disconnectedfrom the machine
