Part No. 237062 Z-45/25 Bi-Energy • Z-45/25J Bi-Energy 3 - 7September 2015 Section 3 • Scheduled Maintenance ProceduresA-1Inspect the Manuals and DecalsGenie specifications require that this procedure beperformed daily or every 8 hours, whichever comesfirst.Maintaining the operator’s and safety manuals ingood condition is essential to safe machineoperation. Manuals are included with each machineand should be stored in the container provided inthe platform. An illegible or missing manual will notprovide safety and operational informationnecessary for a safe operating condition.In addition, maintaining all of the safety andinstructional decals in good condition is mandatoryfor safe machine operation. Decals alert operatorsand personnel to the many possible hazardsassociated with using this machine. They alsoprovide users with operation and maintenanceinformation. An illegible decal will fail to alertpersonnel of a procedure or hazard and could resultin unsafe operating conditions.1 Check to make sure that the operator's andsafety manuals are present and complete in thestorage container on the platform.2 Examine the pages of each manual to be surethat they are legible and in good condition.Result: The operator's manual is appropriate forthe machine and all manuals are legible and ingood condition.Result: The operator's manual is not appropriatefor the machine or all manuals are not in goodcondition or are illegible. Remove the machinefrom service until the manual is replaced.3 Open the operator's manual to the decalsinspection section. Carefully and thoroughlyinspect all decals on the machine for legibilityand damage.Result: The machine is equipped with allrequired decals, and all decals are legible and ingood condition.Result: The machine is not equipped with allrequired decals, or one or more decals areillegible or in poor condition. Remove themachine from service until the decals arereplaced.4 Always return the manuals to the storagecontainer after use.Note: Contact your authorized Genie distributor orGenie if replacement manuals or decals areneeded.Checklist A Procedures
