Terex Z30NF-23000 Operator's Manual

Also see for Z-30/20N: Maintenance manual Maintenance manual Maintenance manual Operator's manual Service and repair manual

Operator's Manual Eighth Edition • First PrintingSpecifications56 Z ® -30/20N • Z ® -30/20N RJ Part No. 1319005GTZ-30/20N with rotating jibHeight, working maximum 35 ft 2 in 10.7 mHeight, platform maximum 29 ft 2 in 8.89 mHeight, stowed maximum 6 ft 7 in 2 mHorizontal reach, maximum 21 ft 6.25 mWidth 3 ft 11 in 1.2 mLength, stowed 17 ft 5 in 5.3 mMaximum load capacity 500 lbs 227 kgMaximum wind speed 28 mph 12.5 m/sWheelbase 5 ft 3 in 1.6 mTurning radius (outside) 9 ft 10 in 3.0 mTurning radius (inside) 5 ft 5 in 1.7 mTurntable rotation 359°Turntable tailswing 0°Power source 8 Group 903, L-16,6V 390AH BatteriesControls 24V DC ProportionalPlatform dimensions (length xwidth)46 in x 30 in1.17 m x 76 cmPlatform leveling self-levelingPlatform rotation 180°Jib rotation 180°AC outlet in platform StandardHydraulic pressure, maximum(boom functions)2800 psi 193 barSystem voltage 48VTire size, solid rubber 22 x 7 x 17.75 in56 x 18 x 45 cmAmbient operating temperature -20° F to 120° F-29° C to 49° CGround clearance 3.50 in 8.9 cmWeight(Machine weights vary with option configurations. Seeserial label for specific machine weight.)Drive speedsDrive speed, stowed 3.0 mph40 ft/9 sec4.8 km/h12.2 m/9 secDrive speed, raised orextended0.45 mph40 ft/60 sec0.73 km/h12.2 m/60 secMaximum slope rating, stowed positionPlatform downhill 35% 19°Platform uphill 20% 11°Side slope 25% 14°Note: Slope rating is subject to ground conditions withone person in the platform and adequate traction.Additional platform weight may reduce slope rating.Maximum allowablechassis inclinationRefer to "Tilt SensorActivation Settings" sectionFloor loading informationTire load maximum 7500 lbs 3402 kgTire contact pressure(per tire)103 psi 710 kPa7.24 kg/cm 2Occupied floor pressure 537 psf 25.71 kPa2622 kg/m 2Note: Floor loading information is approximate and doesnot incorporate different option configurations. It shouldbe used only with adequate safety factors.Continuous improvement of our products is a Geniepolicy. Product specifications are subject to changewithout notice or obligation.

/ 61

Related manuals for Terex Z-30/20N