UBI EasyCoder 301 User Manual

Contents

UBI EasyCoder 301 User Manual Manual pdf 23 page image

23UBI EasyCoder 301 Direct Protocol – Programmer's Guide Ed. 1Chapter 4 Label DesignAs standard, UBI Direct Protocol supports 37 of the most commonbar code symbologies. Each bar code (optionally including its hu-man readable interpretation) makes up a bar code field.In addition to the general formatting commands, PRPOS, ALIGNand DIR (see chapter 4.2), a bar code field can specify the follow-ing properties:• Bar Code Type• Height (height of bar pattern)• Ratio (wide bars/narrow bars)• Magnification (bar pattern)• Bar Code Interpretation On/Off• Bar Code Interpretation Font• Bar Code Interpretation Font Size• Bar Code Interpretation Font SlantSelect a Bar Code TypeThe type of bar code is specified by a BARTYPE command con-taining an abbreviation of the bar code name. The abbreviation mustbe entered exactly as listed below.BARTYPE | BT "" the designation of the bar code type accord-ing to the list below; it must be enclosed bydouble quotation marks.Default: "INT2OF5"Reset to default by: PRINTFEED|PFBar Code AbbreviationCodabar "CODABAR"Code 11 "CODE11"Code 16K "CODE16K"Code 39 "CODE39"Code 39 full ASCII "CODE39A"Code 39 w. checksum "CODE39C"Code 49 "CODE49"Code 93 "CODE93"Code 128 "CODE128"DUN-14/16 "DUN"EAN-8 "EAN8"EAN-13 "EAN13"EAN-128 "EAN128"Five-Character Supplemental Code "ADDON5"Industrial 2 of 5 "C2OF5IND"Industrial 2 of 5 w. checksum "C2OF5INDC"4. Bar Code FieldNote:Complex bar codes, such as PDF417 and MaxiCode, must bespecified by means of an extendedversion of the BARSET com-mand, see chapter 9.1.