31UBI EasyCoder 301 Direct Protocol – Programmer's Guide Ed. 1Chapter 4 Label Design7. Line Field A line can be printed in right angles along or across the paper ac-cording to the print direction.In addition to the general formatting commands, PRPOS, ALIGNand DIR, a line field is specified by a single command.Set Size of the LineThe size of the line is specified with regard to length and line weight(thickness).PRLINE | PL , the length of the line in dots along the se-lected direction. the line weight in dots.Default: NoSummaryTo create a line field, the following formatting commands must begiven (in most cases default values may substitute missing para-meters). Printing commands are explained in chapter 5.2.Purpose Command Default RemarksX/Y Position PRPOS | PP 0,0 Number of dotsAlignment ALIGN | AN 1 Select ALIGN 1 – 9Direction DIR 1 Select DIR 1 – 4Line size PRLINE | PL n.a. Length and linethickness in dotsExample:PP 100,100:AN 1:DIR 4:PL 200,10 ↵
