UBI EasyCoder 301 User Manual

Contents

UBI EasyCoder 301 User Manual Manual pdf 28 page image

28UBI EasyCoder 301 Direct Protocol – Programmer's Guide Ed. 1Chapter 4 Label Design5. Image Field An image field contains a picture or logo in .PCX format. The im-age can either be stored in the printer's RAM or in a memory card.It can also be downloaded from the host computer.You cannot store images in the printer's ROM, but it does containtwo standard images: "ROM:UBI.1", which is the UBI logo forDIR 1 and 3, and "ROM:UBI.2", which is the UBI logo for DIR 2and 4.In addition to the general formatting commands, PRPOS, ALIGNand DIR, an image field can contain the following commands:• Name• Magnification• Normal/Inverse printingSelect an Image:An image is selected by the full name under which it is stored in theprinter's memory, either as plain text or as a variable (also see chap-ter 4.9).PRIMAGE | PM "" the full name and storage location of the im-age including extension, enclosed by doublequotation marksDefault: NoneThe UBI image name convention includes an extension (.1 or .2),where .1 indicates that the image is intended for print directions 1and 3, whereas .2 indicates print directions 2 and 4 (see chapter4.2). For example, the image "ROM:UBI.1" is suited for directions1 and 3.Set Image Magnification:Images can be magnified 1 – 4 times independently with regard toheight and width by means of a MAG command.MAG , the magnification factor 1, 2, 3 , or 4 timeswith regard to height. the magnification factor 1, 2, 3 , or 4 timeswith regard to width.Default: 1,1Reset to default by: PRINTFEED|PFTo obtain the best printout quality, select a larger image rather thanmagnifying a smaller one.