Ubee DDW365 User Manual
Also see for DDW365: User guide
                                                                                                          | |
Contents
| 
Ubee Interactive Understanding Specifications, Standards, and FirmwareUbee DDW365 Advanced Wireless Gateway Subscriber User Guide • February 2014 71.6 Understanding Specifications, Standards, and FirmwareThe following list provides the features and specifications of the DDW365.Interfaces and Standards Cable: F-Connector, female LAN: 4 10/100/1000 Mbps RJ45 ports USB: 1 USB 2.0 host port DOCSIS 3.0 certified DOCSIS 1.0/1.1/2.0 certifiedONLINE White Flashes – Obtaining an IP address and configuration file.On – Configuration completed successfully.WiFi White On – WiFi is enabled.Off – WiFi is disabled.WPSBUTTON(top ofdevice)White If not used, the LED is off. When a user pushes the WPS button or triggers WPS via thedevice’s Web UI, an LED on the top-front of the device blinks for 4 minutes until a PIN isentered from the wireless client that wishes to connect (for example, a laptop computer). Aftera WiFi client attaches successfully, the LED remains On for 5 minutes, then turns Off.REAR PANELLED Color DescriptionETH1ETH2ETH3ETH4Green/OrangeOn Green – An Ethernet device is connected to the device at 1000 Mbps speeds (GigabitEthernet).On Orange – An Ethernet device is connected to the device at 10/100 Mbps speeds.Flashes (in Green or Orange) – When data is being passed between the cable modem andthe connected device.The Ethernet ports are used to connect Ethernet devices such as computers, gamingconsoles, and/or routers/hubs to the DDW365 using RJ-45 cables. Each Ethernet port on theback panel of the device has an LED to indicate its status when an Ethernet device isconnected.FRONT PANELLED Color Description |
Related manuals for Ubee DDW365
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine