Ubee Interactive Using the Pass Through OptionUbee DDW365 Advanced Wireless Gateway Subscriber User Guide • February 2014 536.7 Using the Pass Through OptionUse the Pass Through option to configure a pass through table. Devices in the passthrough table are treated as bridge devices, storing and forwarding data between LANinterconnections.StepsTo configure a pass through table:1. Click Advanced from the main menu.2. Click Pass Through from the left side menu. The pass through fields are explainedfollowing this screen example.6.8 Using the DMZ Host OptionUse the DMZ (Demilitarized Zone) Host option to expose a host IP address to the WAN(public Internet). You can use this option when applications do not work with port triggersor other networking strategies.Label DescriptionPass Through MAC Addresses Defines the input host’s MAC address.Add MAC Address Adds the input host’s MAC address.Addresses entered: n/32 Displays the MAC addresses to be blocked. The number ofMAC addresses is shown as 0/32 where 0 is the number ofaddresses in the list. You can add up to 32 MAC addresses atone time.Remove MAC Address Removes the input host’s MAC address.Clear All Removes all of the input host’s MAC addresses.
