Ubiquiti AirFiber 11FX User Manual

Also see for airFiber 11FX: Quick start guide

19Chapter 4: DashboardairFiber AF-11FX User G uideUbiquiti Networks, Inc.(Ant Gain/Cable Loss) Displays the airFiber X radio’snet antenna gain, which is the antenna gain minus cableloss. Antenna gain (the gain of the antenna being used)and cable loss (the loss in the cable from the radio to theantenna, including approx. 1 dB due to the Duplexers) areset using the Antenna Gain and Cable Loss fields on theWireless tab.EthernetMGMT MAC Displays the MAC address of theManagement port.MGMT Displays the speed and duplex of theManagement port.DATA Displays the speed and duplex of the Data port.DATA Cable Length Displays the Ethernet cable lengthfrom radio to remote port. This is displayed only for cableslonger than 20 m.DATA Pair 0 (Pins 1,2) If the cable is functioning properly,displays the SNR of the twisted pair; if the cable has afault, displays the fault (“open” or “short”) and the distanceat which the fault has occurred. If the remote port isadministratively shut down, this field displays “normal”.DATA Pair 1 (Pins 3,6) If the cable is functioning properly,displays the SNR of the twisted pair; if the cable has afault, displays the fault (“open” or “short”) and the distanceat which the fault has occurred. If the remote port isadministratively shut down, this field displays “normal”.DATA Pair 2 (Pins 4,5) If the cable is functioning properly,displays the SNR of the twisted pair; if the cable has afault, displays the fault (“open” or “short”) and the distanceat which the fault has occurred. If the remote port isadministratively shut down, this field displays “normal”.DATA Pair 3 (Pins 7,8) If the cable is functioning properly,displays the SNR of the twisted pair; if the cable has afault, displays the fault (“open” or “short”) and the distanceat which the fault has occurred. If the remote port isadministratively shut down, this field displays “normal”.