38Chapter 9: ToolsairFiber AF‑11FX User GuideUbiquiti Networks, Inc.DiscoveryThe Device Discovery tool searches for all Ubiquiti deviceson your network. The Search field automatically filtersdevices containing specified names or numbers as youenter them.It reports the MAC Address, Device Name, Mode, SSID,Product type, Firmware version, and IP Address for eachUbiquiti device. To access a device configuration throughits web management interface, click the device’s IPaddress.To refresh the window, click Scan.PingYou can ping other devices on the network directly fromthe airFiber X radio. The Ping tool uses ICMP packets tocheck the preliminary link quality and packet latencyestimation between two network devices.Network PingSelect Destination IP You have two options:• Select a remote system IP from the drop‑down list,which is generated automatically.• Select specify manually and enter the IP address in thefield displayed below the option.Packet Count Enter the number of packets to send forthe ping test.Packet Size Specify the size of the packet.Start Click this button to start the test.Packet loss statistics and latency time evaluation aredisplayed after the test is completed.TracerouteThe Traceroute tool traces the hops from the airFiber Xradio to a specified outgoing IP address. Use this tool tofind the route taken by ICMP packets across the networkto the destination host.Destination Host Enter the IP address of thedestination host.Resolve IP Addresses Select this option to resolve the IPaddresses symbolically rather than numerically.Start Click this button to start the test.Responses are displayed after the test is completed.airViewUse the airView Spectrum Analyzer to analyze the noiseenvironment of the radio spectrum and intelligently selectthe optimal frequency to install a PtP airFiber link.There are two system requirements for the airViewSpectrum Analyzer:• Your system is connected to the device via Ethernet.Launching airView will terminate all wirelessconnections on the device.• Java Runtime Environment 1.6 (or above) is required onyour client machine to use airView.On first use, the following window appears.• Launch airView Spectrum Analyzer Click LaunchairView Spectrum Analyzer to download the JavaNetwork Launch Protocol (jnlp) file and complete thelaunch of airView.