54Appendix D: Compliance InformationAirRouter HP User GuideUbiquiti Networks, Inc.Appendix D: ComplianceInformationInstaller Compliance ResponsibilityDevices must be professionally installed and it is theprofessional installer’s responsibility to make sure thedevice is operated within local country regulatoryrequirements.FCCChanges or modifications not expressly approved by theparty responsible for compliance could void the user’sauthority to operate the equipment.NOTE: This equipment has been tested and foundto comply with the limits for a Class A digital device,pursuant to part 15 of the FCC Rules. These limits aredesigned to provice reasonable protection againstharmful interference when the equipment is operated ina commercial environment. This equipment generates,uses, and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructionmanual, may cause harmful interference to radiocommunications. Operations of this equipment in aresidential area is likely to cause harmful interferencein which case the user will be required to correct theinterference at his own expense.RF Exposure WarningThe transceiver described here emits radio frequencyenergy. Although the power level is low, the concentratedenergy from a directional antenna may pose a healthhazard. Do not allow people to come closer than 20 cm tothe antenna when the transmitter is operating.Additional information on RF exposure is available on theInternet at www.fcc.gov/oet/info/documents/bulletinsL’émetteur-récepteur décrit ici émet de l’énergie defréquence radio. Bien que le niveau de puissance est faible,l’énergie concentrée à partir d’une antenne directionnellepeut présenter un danger pour la santé. Ne pas permettreaux gens de se rapprocher de 20 cm à l’antenne lorsquel’émetteur est en marche.Des renseignements supplémentaires sur l’exposition auxRF est disponible sur Internet à www.fcc.gov/oet/info/documents/bulletinsIndustry CanadaThis Class A digital apparatus complies with CanadianICES-003.Operation is subject to the following twoconditions:1. This device may not cause interference, and2. This device must accept any interference, includinginterference that may cause undesired operation of thedevice.To reduce potential radio inteference to other users, theantenna type and its gain should be so chosen that theequivalent isotropically radiated power (e.i.r.p.) is not morethan that permitted for successful communication.Cet appareil numérique de la classe A est confrome à lanorme NMB-003 Canada. Son fonctionnement est soumisaux deux conditions suivantes:1. Cet appareil ne peut pas provoquer d’interférences et2. Cet appareil doit accepter toute interférence, y comprisles interférences susceptibles de provoquer unfonctionnement du dispositif.Pour réduire le risque d’interférence aux autresutilisateurs, l’antenne type et son gain doivent êtrechoisies de façon que l’équivalent puissance isotroperayonnée équivalente (pire) n’est pas plus que celaautorisé pour une communication réussie.CE MarkingCE marking on this product represents the product is incompliance with all directives that are applicable to it.Alert sign! Follows CE markingAlert sign must be indicated if a restriction on use appliedto the product and it must follow the CE marking.NB-Identification number (if there is any)Notified body number is indicated if it is involved in theconformity assessment procedure.Please check the CE mark on the product label to find outwhich notified body was involved during assessment.