123Direct station selection keysApart from line keys, the administrator can also configure direct station selection(DSS) keys. You can use a DSS key to call an internal station directly, pick upcalls for this station or forward calls directly to it. The DSS keys are also used forconsultation calls.Calling a subscriber directlyYou cannot use DSS if the user is on another call (flashing LED).With default outgoing linePress the relevant DSS key. The key label switches to show the phone numberof the outgoing line.The line key illuminates. The connection was established by means of the se-lected outgoing line.Selecting the outgoing linePress the line key (e.g. line 2) to select the line for the outgoing call.Press the relevant DSS key.The selected line key illuminates. The connection was established via the select-ed line. The DSS destination is displayed.The phone number of the outgoing line is displayed on the DSS key.Consultation with the DSS subscriberPrerequisite: You are conducting a call and the administrator has configuredthe DSS key for consultation.Press the Softkey. The input field in conversations opens.Press the relevant DSS key.The connection was established by means of the active line. The first call isplaced on "hold". If the subscriber answers, you can toggle, transfer the first callor initiate a conference.This function is not available to you on an OpenScape 4000, see page 219.Q Office O _ø Line 1 ú¤ù Line 2 ú_Q Office O _û 3338 ú¤Q 3334 O _ñ The administrator can configure the DSS key so that the connection is alsoestablished when the DSS subscriber has activated do-not-disturb or callforwarding.Consult E _Q Office O _û 3338 ú¤ñ If the administrator has configured transfer instead of consultation, youcan only transfer the current call to the DSS subscriber.
