79Switching to the held party (alternating)Prerequisite: You are conducting a consultation call page 77 or have accept-ed a second call page 82. You are in the call connection menu.Press the Softkey.Ending an alternate operationPress the Softkey. The active call is disconnected.ConferencePrerequisite: You are conducting a consultation call page 77 or have accept-ed a second call page 82 and the conference function is allowed page 190.Establishing a conference+ or —Press the Softkey – the conference is started. You are connected to both partiesat once. The conference is displayed.Querying information on subscribersPress the Softkey to display the subscribers.€ Select the subscriber.The subscriber is busy.« Open the subscriber information.Alternate R _You can switch back and forth between two parties by repeatedly confirm-ing "Alternate".End & reconnect P_You can initiate a conference by calling the "Conference" function in thecontext menu of either the active or held call. You can alternatively pressa configured Conference key.If you are already involved in a secure connection with a party when youinitiate a consultation call, the original party is placed on hold. The newconsultation connection can be either secure or unsecured. However, thefirst connection remains secure even if all three parties are now joined to-gether in a conference.The entire conference is non-secure if the connection to at least one of theparties is not secure.The relevant padlock icon appears in the "Conference" row.Start conference r _Participants r _User -
