139Activate with the Softkey.Save the setting by selecting the Softkey.SecurityUser passwordYour User password protects your individual configurations, including your lan-guage settings. You can also use the User password to lock your telephone page 141.The administrator may have configured the following settings:• The password is deactivated: You do not have the option of configuring usersettings. The message "Password is disabled" is displayed.• The password is temporarily locked: You do not have the option of configuringuser settings at this time. The message "Password is suspended" is displayed.• After initially logging on to a user area, you may have to replace the defaultpassword with a new password.• A password can have a predefined period of validity: You will have to create anew password when the period ends. The message "Change password (xdays left)" will alert you to this at the appropriate time. The message "Pass-word has expired" appears when the validity period is over. Confirm "Passwortändern" and change the password as described in this section.• If you repeatedly enter the wrong password (2 to 5 times), additional attemptsare blocked. You can make another attempt after a predefined time.• It is possible that you will not be able to re-use a previously used password fora period of time, which means you have to create another "new password".• Your administrator can tell you about the rules for what and how many charac-ters can or must be used in the password.z You can also configure this setting via the Web interface page 207.@ Press the key for the Main menu if appropriate.Open using the Softkey.Open using the Softkey.if nec. j Enter and confirm the User password.€ Select the "Security" function.Open using the Softkey.Open using the Softkey.Allow DND ¢ _Q _The preset password "000000" corresponds to a blank password. In otherwords, the phone cannot be locked and the user menu is not passwordprotected (see also page 140).Settings _$ User settings - _$ Security - _Change user password - _
