Unify OpenScape DECT Phone S5 Base User Manual

Also see for OpenScape DECT Phone S5 Base: Information User guide User guide

Contents

105Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0Additional functions using the PC interfaceDeutschEnglishRejecting/accepting a non-registered Bluetooth deviceIf a Bluetooth device that is not registered in the list of known devices tries to connect to thehandset, a prompt will appear asking you to enter the PIN of the Bluetooth device (Bonding).Changing the Bluetooth name of the handsetThe handset is shown by this name on another Bluetooth device.¤ . . . use to select Bluetooth OK Own Device OK . . . the name andthe device address are shown Change . . . use to change the name SaveAdditional functions using the PC interfaceQuickSync functions:• Sync the handset's directory with Outlook• Upload CLIP-pictures (.bmp) from the computer to the handset• Upload pictures (.bmp) as screensavers from the computer to the handset• Upload sounds (ringtone melodies) from the computer to the handset• Update firmware¤ Connecting the handset to the computer via Bluetooth ( p. 103) or via a USB data cable( p. 80).Reject: ¤ Briefly press the End call key .Accept: ¤ . . . use to enter the PIN of the Bluetooth device to be accepted OK. . . Wait for PIN confirmation . . . thenAdd the device to the list of known devices: YesUse the device temporarily: No . . . the Bluetooth connection can be used, aslong as the device is located within transmission range or until it is switched offThe Gigaset QuickSync program has been installed on the computer.Free to download at wiki.unify.com/wiki/OpenScape_DECT_Phone_S5Connect the handset directly to the PC, not via a USB hub.