111Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0Operation with a PABXDeutschEnglishOperation with a PABXTo find out which settings are required for a PABX, please refer to the PABX user guide.Setting Tone or Pulse dialling mode¤ . . . use to select Settings OK Telephony OK DiallingMode OK . . . use to select Tone or Pulse Select ( = selected)Setting the flash time¤ . . . use to select Settings OK Telephony OK Recall OK. . . possible flash times are listed . . . use to select flash time Select ( = selected)Saving an access code (outside line code)Setting the access code (e.g. "0") for dialling using the fixed line network and using VoIP.¤ . . . use to select Settings OK Telephony OK AccessCode OK . . . thenFixed linenetwork:¤ Access external line with: . . . use to enter or change access code,max. 3 digitsRule: ¤ For . . . use to select when the access code should be dialledCall Lists: The access code will only prefix numbers from a list (list of answeredcalls, list of missed calls).All calls: The access code prefixes all numbers dialled.Off: The access code is deactivated and does not prefix any telephonenumber.Save: ¤ Save
