125Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0Manufacturer's adviceDeutschEnglishCareWipe the device with a damp cloth or an antistatic cloth. Do not use solvents or microfibrecloths.Never use a dry cloth; this can cause static.In rare cases, contact with chemical substances can cause changes to the device’s exterior. Dueto the wide variety of chemical products available on the market, it was not possible to test allsubstances.Impairments in high-gloss finishes can be carefully removed using display polishes for mobilephones.Contact with liquidIf the device comes into contact with liquid:1 Disconnect the power supply.2 Remove the batteries and leave the battery compartment open.3 Allow the liquid to drain from the device.4 Pat all parts dry.5 Place the device in a dry, warm place for at least 72 hours (not in a microwave, oven etc.)with the battery compartment open and the keypad facing down (if applicable).6 Do not switch on the device again until it is completely dry.When it has fully dried out, you will normally be able to use it again.!
