63Z Confirm that the phone number is complete or wait until the autodial delay ex-pires (see page 66).orThe required conversation is shown in the list. Confirm with the Softkey. Theconnection is set up.Entering the phone number firstFirst enter the number. The loudspeaker or headset key illuminates when youenter the first digit.j Enter the phone number. If necessary, correct input using the navigation keys.Z Confirm that the phone number is complete or wait until the autodial delay ex-pires (see page 66).orThe required conversation is shown in the list. Confirm with the Softkey. Theconnection is set up.Dialing with the selected dialing keyYou can program frequently used phone numbers on programmable keys page 86. If you press a selected dialing key, the associated contact or phonenumber is displayed and the connection is set up.Prerequisite: A Function key for selected dialing is programmed page 86.Press the Function key for a saved number. The connection is set up.Dialing from conversationsDepending on the configuration, the conversation list can contain data from thefollowing directories:• Caller list• Subscriber data from Circuit• Subscriber data from Exchange• Subscriber data from the LDAP directoryIf you cannot find redials or received or dialed calls in the list, check if the calljournal is activated.The conversations list is displayed on the screen. If the contact you want is notvisible, then select withμ€ or search by entering the phone number or name.©123456789 OGeorg Simon Ohm O _©123456789 OGeorg Simon Ohm O _Party _
