Unify OpenScape SL5 User Manual

Also see for OpenScape SL5: Information User manual

Contents

Unify OpenScape SL5 User Manual Manual pdf 11 page image

Getting started 11Setting the date and timeSet the date and time so that the date and time can be assigned correctly to incoming calls and to enablethe alarm to be used.¤ Press the display key Timeor, if the date and time have already been set:¤ . . . use to select Settings OK Date/Time OKThe active cursor position flashes . . . use to change the cursorposition . . . use to switch between cursor positionsEnter date:¤ . . . use to enter the day, month and year in 8-digit format,e.g. for 15/08/2015.Enter the time.¤ . . . use to enter hours and minutes in 4-digit format, e.g.for 07:15.Save setting:¤ Press the display key Save . . . the message Saved is shown on the displayand a confirmation tone is issuedReturn to idle status:¤ Press the End call key and holdThe phone is now ready for use!Adjusting the handset settingsYou can adjust the handset to suit your requirements in the Settings menu, for example you can select adifferent screensaver, a different color scheme for the display or different ringtones.¤ . . . use to select Settings OK . . . use to select the submenu, for example Dis-play & Keypad OK . . . navigate to the required function . . . select the setting Save¤ To set tones and signals : Audio Settings confirm with OK . . . navigate to the requiredfunction . . . select the setting SaveConnecting the headset¤ Connect a headset with a 2.5 mm jack to the left side of the handset .You will find headset recommendations on the product page at wiki.unify.com/wiki/OpenScape_DECT_Phone_SL5.The headset volume corresponds to the setting for the earpiece volume ( S. 29).Connecting a USB data cableFor exchanging data between the handset and PC:¤ Connect the USB data cable with micro-USB plug into the USBsocket at the bottom of the handset .Connect the handset directly to the PC, not via aUSB hub.Calls TimeDate/TimeDate:8/15/2015Time:12:00 AMBack Save1111