162 BluetoothUsing a Bluetooth conference phoneYou can connect a Bluetooth conference phone that is approved for use with theOpenStage 60/80 to your OpenStage 60/80. Ask your administrator aboutapproved conference phone types.Connecting a Bluetooth conference phone "Konftel60W"Below is an example of connecting and operating a "Konftel 60W" conferencephone.Prerequisite: The Bluetooth function on your OpenStage is activatedÆ Page 148. The "Konftel 60W" conference phone is ready for use butswitched off (see "Konftel 60W" user guide).v Press the key shown until the application's "Settings" tab is active.Select and confirm the option shown.if nec. j Enter and confirm the user password.Select and confirm the option shown.Select and confirm the option shown.Select and confirm the option shown. The Bluetooth pairing manager dialog isselected.Select the option shown.Finding and pairing the Bluetooth conference phone "Konftel 60W"Press and hold the trim key on the "Konftel 60W" for two seconds until the bluedisplay lights flash (warning: the device must be switched off first).Select and confirm the option shown in the context menu. The system searchesfor devices.Select and confirm the Konftel 60W Bluetooth device found.j Enter and confirm the PIN ("0000" for Konftel 60W).The message "Pairing in progress" is displayed. Following successful pairing,the device is added to the list of paired devices. You hear a short confirmationtone from the Konftel 60W before the device switches itself off again.UserConfigurationBluetoothPaired devicesOptionsAdd deviceKonftel 60W
