Programming sensor keys 81Programming a procedure keyNumbers and functions that require further input, i.e. which contain severaloperating steps, can be saved on a key on your telephone.S Press and hold the required sensor key.Select and confirm the option shown.orv Open the Program/Service menu Æ Page 39.Select and confirm the option shown.S Press the required sensor key.If the key is already in use, the programmed phone number appears on thedisplay.Confirm the option shown.Select and confirm the option shown.Confirm the option shown.j Enter procedure. Example:*67 Code for associated dialing.231 Number of the phone for which the call should be made.01234 The number to be dialed.if nec. S Press the "Pause" key to enter pauses (a "P" appears on the display).Confirm the option shown.or If you make a mistake:Select and confirm the option shown.This deletes all numbers entered.if nec.Select and confirm the option shownÆ Page 83.Confirm the option shown.orSelect and confirm the option shown.Assign telephony functionProg. feature keyChange keyMore features gProcedure keySavePreviousKey labelExitAnother keySelect the stored procedure by pressing the sensor key.Procedures with activatable/deactivatable functions are activated bypressing the sensor key once and deactivated by pressing it again.You can press the procedure key during a call to automatically send thesaved digits as DTMF signals Æ Page 66.
