Unitech HT580 User Manual
Also see for HT580: Software guideSpecificationsUser reference guideGetting started guideUser reference guide
                                     | |
Contents
|
21Chapter 2 Using the HardwareProtocolTo communcate wth Untech’s PT seres devces, the HT580 provdes mult-protocol.Please refer to the communcaton secton and mult-protocol for more detals.NOTE: HT580’s built-in Bluetooth modem is fixed at 38400bps. If the userchanges the port opton to Bluetooth, the baud rate wll automatcally be changed to38400bps.Terminal < TERM >The TERM command enables the HT580 to run a bult-n Termnal emulator. The HT580wll operate as a dumb ASCII termnal when the user select ths feature and dsable theFormcachng menu.To change the communcaton settngs of Termnal Mode, proceed to the SupervisorMode and enter Term Setup. When finished, go to the Ready Mode menu and press 2.Terminal IDEach HT580 “Terminal” can be identified by an 8-character string Terminal ID assignedby the user. Intally, the default ID s “HT580”. Vald characters for assgnng TermnalID are alphanumerc characters (‘A’-’Z’, ‘0’-’9’). Ht ENTER to make the selecton.OnlineUse the [ ] key to toggle between below 3 modes, then ht ENTER to make theselecton.ITEM DESCRIPTIONLOCAL The HT580 does not transmt gathered data toRS232/USB/Bluetooth.REMOTE NONE The HT580 wll output data gathered from the bar code port orkeypad to ts RS- RS232/USB/Bluetooth wth None protocol.REMOTE MULTI The HT580 wll output data gathered from the bar code port orkeypad to ts RS- RS232/USB/Bluetooth wth Mult-Protocol.EchoUse the [ ] key to toggle between ON and OFF, then ht ENTER to make the selecton.The collected data wll be dsplayed on the HT580 LCD when Echo s set to ON,otherwse data wll not be dsplayed when t s set to OFF. |
Related manuals for Unitech HT580
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine