- 109 - © 2018 unitech Electronics Co., Ltd. All rights reserved.unitech is a registered trademark of unitech Electronics Co., Ltd.MS282 User’s Manual3.15.3 1D Quiet Zone LevelThis feature sets the level of aggressiveness when decoding bar codeswith a reduced quiet zone (the margin on either side of a bar code), andapplies to symbologies enabled by a Reduced Quiet Zone parameter.Because higher levels increase the decoding time and risk of misdecodes,Zebra strongly recommends enabling only the symbologies which requirehigher quiet zone levels, and leaving Reduced Quiet Zone disabled for allother symbologies. Options are:•1D Quiet Zone Level 0 - The engine performs normally in terms of quietzone.•1D Quiet Zone Level 1 - The engine performs more aggressively in termsof quiet zone.•1D Quiet Zone Level 2 - The engine only requires a quiet zone at the endof bar code for decoding.•1D Quiet Zone Level 3 - The engine decodes anything in terms of quietzone or end of bar code.1D Quiet Zone Level 01D Quiet Zone Level 1*1D Quiet Zone Level 21D Quiet Zone Level 3
