7vacon • 118 Control keypadLocal contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/7.2 Keypad push-buttonsThe VACON® alphanumeric control keypad features 9 push-buttons that are used for the control ofthe AC drive (and motor), parameter setting and value monitoring.Figure 61. Keypad push-buttons7.2.1 Button descriptions= This button is used to reset active faults (see Chapter 7.3.4).= This button is used to switch between two latest displays. May be useful whenyou want to see how the changed new value influences some other value.=The Enter button serves for:1) confirmation of selections2) fault history reset (2…3 seconds)=Browser button upBrowse the main menu and the pages of different submenus.Edit values.=Browser button downBrowse the main menu and the pages of different submenus.Edit values.=Menu button leftMove backward in menu.Move cursor left (in parameter menu).Exit edit mode.Swap between keypad control and another control as active control place (seeChapter 7.2.1.1)=Menu button rightMove forward in menu.Move cursor right (in parameter menu).Enter edit mode.3063_00resetselectenter+-
