Control keypad vacon • 141Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/7Hardware (S6.8.5)The Hardware information page provides information on the following hardware-related topics:Expander boards (S6.8.6)In the Expander boards pages you find information about the basic and option boards connected tothe control board (see Chapter 6.1.2).You can check the status of each board slot by entering the Expander boards page with the Menubutton right and using the Browser buttons to choose the board whose status you wish to check.Push the Menu button right again to display the status of the board. The keypad will also display theprogram version of the respective board when you push either one of the Browser buttons.If no board is connected to the slot the text 'no board' will be shown. If a board is connected to a slotbut the connection is somehow lost the text 'no conn.' is displayed. See Chapter 6.2 and Figure 41and Figure 50 for more information.For more information on the expander board-related parameters, see Chapter 7.3.7.Figure 83. Expander board information menusDebug menu (S6.8.7)This menu is meant for advanced users and application designers. Contact factory for anyassistance needed.7.3.7 Expander board menu (M7)The Expander board menu makes it possible for the user 1) to see what expander boards areconnected to the control board and 2) to reach and edit the parameters associated with the expanderboard.Table 58. Hardware information pagesPage Content6.8.5.1 Power unit type code6.8.5.2 Nominal voltage of the unit6.8.5.3 Brake chopper6.8.5.4 Brake resistorE1 E5READYI/OtermA:NXOPTA1I/OtermREADYB:NXOPTA2I/OtermE1 E2I/OtermREADYI/OtermE1 E2 10001.0Expander boardsSoftware versionStateRun11397_uk
