Vacon NX User Manual

Also see for NX: Installation manual User manual Quick help User manual User manual

Contents

Vacon NX User Manual Manual pdf 16 page image

3vacon • 14 Receipt of deliveryLocal contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/3. RECEIPT OF DELIVERYThe standard delivery of VACON® NX Liquid-Cooled AC drives includes all or part of the followingcomponents:VACON® NX Liquid-Cooled AC drives have undergone scrupulous tests and quality checks at thefactory before they are delivered to the customer. However, after unpacking the product, check thatno signs of transport damages are to be found on the product and that the delivery is complete(compare the type designation of the product to the code).Should the drive have been damaged during the shipping, contact primarily the cargo insurancecompany or the carrier.If the delivery does not correspond to your order, contact the supplier immediately.3.1 Type designation codeThe type designation code for the VACON® NX Liquid-Cooled drives is presented below.*) Note, the control unit of NX_8 (voltage class 8) drives need to be supplied with a external 24 Vdc powersource.• Power unit• Control unit• Main line connecting hoses andconduits (1.5 m) + aluminiumadapters for Ch5-Ch74• Tema 1300 series fast connectorsfor Ch3-Ch4• Choke (not DC-fed inverters, type code I)• Control unit mounting kit• Optic fibre & cable set (1.5 m) forcontrol unit; Optic sets in differentlengths also available• Optic fibre cable set for 2*CH64/CH74:1.8 m/11 fibres (Power module 1) and3.8 m/8 fibres (Power module 2)NXP 0000 A 0 N 1 SWV A1A20000C35Option boards; each slot is represented by two characters where:A = basic I/O board, B = expander I/O board,C = fieldbus board, D = special boardHardware modifications; Supply - Mounting - BoardsF = Fiber connection/standard (from CH61)G = Fiber connection/varnished (from CH61)S = Direct connection/standardV = Direct connection/varnishedW = Liquid-cooled module with aluminium heatsinkP = Liquid cooled module with nickel-coated aluminium heatsinkI = Inverter unit; DC-supplyS = Standard supply; 6-pulse connection with chokesN = Standard supply; 6-pulse connection without chokesT = 12-pulse connection (with chokes)U = 12-pulse connection (without chokes)2 = Active front end unit8 = Brake chopper unitBrake chopper0 = no brake chopper1 = internal brake chopper (CH3, CH72 (6-pulse) & Ch74 only)EMC emission level:N = No EMC emission protection; to be installed in enclosures.T = Fulfils standard 61800-3 for IT networks.Control keypad:A = standard (alpha-numeric)B = neutral (no local control keypad)F = dummy panelG = graphic displayNominal mains voltage (3-phase):5 = 380–500 V ac, 6 = 525–690 V ac (640–1100 Vdc),8 = 525–690 Vac (640–1200 Vdc). (CH6X only). *)Nominal current (low overload)0007 = 7 A, 0022 = 22 A, 0205 = 205 A etc.Product range: NXP = high-performance, NXB = brake chopper unit,NXA = Active front end unit, NXN = Non-regenerative front end unitEnclosure class:0 = IP003035B_uk