Vacon OPT-A2 User Manual
Also see for OPTA1: User manual
                       | |
Description of parameters vacon • 1524-hour support +358 (0)40 8371 150 • Email: vacon@vacon.com4.3 Output signals4.3.1 Digital output signals2.3.1.1 DO1 (ID1216)Select the signal for controlling the DO1.0 = Not used1 = Ready2 = Running3 = Fault4 = No Fault5 = Warning6 = Braking active (BCU is braking)2.3.1.2 DO2 (ID1217)Select the signal for controlling the relay output 1 (RO1) of OPT-A2 option board.See parameter P2.3.1.1 for the list of values.2.3.1.3 DO3 (ID1218)Select the signal for controlling the relay output 2 (RO2) of OPT-A2 option board.See parameter P2.3.1.1 for the list of values.2.3.1.4-2.3.1.13 DO4 – DO13 (ID1385 – ID1429)These parameters are only visible when there are additional option boards with digitaloutputs installed in the BCU. If for example the option board OPT-B5 has been installedthe parameters for outputs DO4-DO6 become visible.See parameter P2.3.1.1 for the list of values. |
Related manuals for Vacon OPTA1
manualsdatabase
Your AI-powered manual search engine