Vacon OPT-A2 User Manual
Also see for OPTA1: User manual
                       | |
6 • vacon Control I/OTel.+358 (0)201 2121 • Fax +358 (0)201 212 2052. CONTROL I/OOPT-A1Terminal Signal Description1 +10V ref Reference voltage Maximum current 10 mA2 AI1+ Analogue input 1, voltage orcurrentDefault: 0– +10V (Ri = 200 kΩ)(-10V…..+10V Joy-stick control,selected with a jumper)0– 20mA (Ri = 250 Ω)3 AI1- Analogue input common Ground for reference and controls4 AI2+5 AI2-Analogue input 2 Same as A1 but default is 0-20mA.6 +24V Control voltage output Voltage for switches, etc. max 0.1 A7 GND I/O ground Ground for reference and controls8 DIN1 Digital input 19 DIN2 Digital input 210 DIN3 Digital input 3Fault Reset (Par. P2.2.1.1)Ri = min. 5kΩ 18…30V = "1"11 CMA Common for DIN 1—DIN 3 Connect to GND or +24V12 +24V Control voltage output Voltage for switches (see #6)13 GND I/O ground Ground for reference and controls14 DIN4 Digital input 415 DIN5 Digital input 516 DIN6 Digital input 6Run enable (Par. P2.2.1.3)Ri = min. 5kΩ 18…30V = "1".17 CMB Common for DIN4—DIN6 Connect to GND or +24V18 AO1+19 AO1-Analogue output 1 ProgrammableRange 0—20 mA/RL , max. 500Ω20 DO1 Digital outputREADY (Par. P2.2.5)ProgrammableOpen collector, I≤50mA, U≤48 VDCOPT-A221 RO122 RO123 RO1Relay output 1RunningSwitching capacity24VDC/8A250VAC/8A125VDC/0.4AMin. switching load 5V/10mA24 RO225 RO226 RO2Relay output 2FaultSwitching capacity24VDC/8A250VAC/8A125VDC/0.4AMin. switching load 5V/10mATable 2- 1. Default I/O configuration.OPT-B8Terminal Signal Technical information1 R1 + AnIN:X.12 Rm13 R1 -PT100 Input, -30…200°C, one sensor.Accuracy ≤ 1°C.Sensor current 10 mA.4 R2 + AnIN:X.25 Rm26 R2 -PT100 Input, -30…200°C, one sensor.Accuracy ≤ 1°C.Sensor current 10 mA.7 R3 + AnIN:X.38 Rm39 R3 -PT100 Input, -30…200°C, one sensor.Accuracy ≤ 1°C.Sensor current 10 mA.10 NC Not connectedTable 2- 2. I/O terminals on OPT-B8 |
Related manuals for Vacon OPTA1
manualsdatabase
Your AI-powered manual search engine