Vacon OPT-A2 User Manual
Also see for OPTA1: User manual
                       | |
Brake Chopper Application – Parameter lists vacon • 724-hour support +358 (0)40 8371 150 • Email: vacon@vacon.com3. BRAKE CHOPPER APPLICATION – PARAMETER LISTSOn the next pages you will find the lists of parameters within the respective parameter groups.Column explanations:Code = Location indication on the keypad; Shows the operator the present parameternumberParameter = Name of parameterDefault = Value preset by factoryMin = Minimum value of parameterMax = Maximum value of parameterUnit = Unit of parameter value; given if availableID = ID number of the parameter (used with PC tools and fieldbus)Note = Description of parameter3.1 Monitoring values (Control keypad: menu M1)The monitoring values are the actual values of parameters and signals as well as statuses andmeasurements. Monitoring values cannot be edited.See Vacon NX User's Manual, Chapter 7 for more information.Code Parameter Unit ID NoteV1.1 Total Current A 1104 Filtered braking current in Amperes.V1.2 Power kW 1106 Braking power in kW.V1.3 DC-link Voltage V 1108 DC intermediate voltage in VoltsV1.4 Unit Temperature °C 1109 Unit temperature C-degrees.V1.5 ANALOG OUTPUT 1 % 1112 Analog Output 1 in%V1.6 DIN1, DIN2, DIN3 15 Digital Inputs A1, A2 and A3 Status (sum)V1.7 DIN4, DIN5, DIN6 16 Digital Inputs B4, B5 and B6 Status (sum)V1.8 DO1, RO1, RO2 17 Digital Output and Relay 1&2 Status (sum)V1.9 Unit Nom Voltage V 111 Nominal voltage rating of the FrequencyConverter.V1.10 Unit Nom Current A 1118 Nominal current rating of Frequency Converter.V1.11 DC Nom Voltage V 1120 Nominal value of Dc-link voltage in Volts.V1.12 MainControlWord 1160 See the chapter 5V1.13 MainStatusWord 1162 See the chapter 5V1.14 Active Fault 37 Active fault codeV1.15 PT100(1) Temperature °C 50 Temperature measured with PT100 sensor 1V1.16 PT100(2) Temperature °C 51 Temperature measured with PT100 sensor 2(only when OPT-B8 is used)V1.17 PT100(3) Temperature °C 52 Temperature measured with PT100 sensor 3(only when OPT-B8 is used)Table 3-1. Monitoring values |
Related manuals for Vacon OPTA1
manualsdatabase
Your AI-powered manual search engine