23© Vallox Oy - All rights reservedUSING THE UNITVENTILATION PROFILESCHANGING THE PROFILE1. Press the Change profile button until the desired ventilationprofile icon appears on the display.2. Wait until the main display of the ventilation profile appears.3. The ventilation profile has now been changed.Browsing the information of the At home,Away, and Boost profiles.To view the profile settings:1. Open the main display of the profile you wish to view.2. Select Profile information.The following information is shown on the first informationdisplay of the profile:• Supply air — Indicates the temperature of the air blown intothe building and its set value (in brackets), if the supply air iswarmer than the set value.• Outdoor air — Indicates the outdoor temperature.• Fan speed — Indicates the fan speed. If the automatic fanspeed boost is turned on, the set value is shown in bracketsfirst followed by the actual fan speed.• Cell status — Indicates the status of the ventilation unit heatrecovery cell. The status options are:• Heat recovery — The heat recovery cell heats the air streamingin from outdoors.• Cooling — The heat recovery cell cools the air streaming in fromoutdoors.• Cell bypass — The inflowing air bypasses the heat recovery cell.• Defrosting — The heat recovery cell is being defrosted.3. Proceed to the next phase by selecting Right arrow.The next information display of the profile shows the followinginformation:• Humidity — Indicates the highest relative humidity of airmeasured by the sensors.• Carbon dioxide — Indicates the highest carbon dioxide levelmeasured by the sensors.• Replace filters — Indicates the next recommended filterreplacement date.• Time in operation — Indicates how long the device has beenrunning.