29© Vallox Oy - All rights reservedUSING THE UNITSETTINGSTIME AND DATESetting the time and dateThe available time settings are:• Time• 24- or 12-hour clock• Automatic daylight saving time• DateNOTEThe ventilation unit time will withstand a power cut of a few hours.Setting the time1. Select Settings > Time and date.2. Select OK.3. Use the Plus and Minus buttons to set the hours.4. Select Right arrow.5. Use the Plus and Minus buttons to set the minutes.6. Select OK.Selecting the 24- or 12-hour clockThe 24-hour clock is used by default. To use the 12-hour clock:1. Select Settings > Time and date.2. Select OK.3. Select Right arrow until the 2/4 display opens4. Select Minus. The 24-Hour setting value is changed to Off.5. Select OK.Automatic daylight saving timeBy default, automatic daylight-saving time is turned on. To use themanual daylight saving time setting:1. Select Settings > Time and date.2. Select OK.3. Select Right arrow until the 3/4 display opens.4. Select Plus. The Dayl.saving time setting value is changed to Off.5. Select OK.
