Valor Fires 762 Installer And Owner Manual

Also see for 762: Installer and owner guide Installer and owner guide

Contents

NOTE If the pilot does not stay litafter several tries, turn thegas control knob (main valveknob) to ‘OFF’ and proceedto step 10.8. Turn the ‘manual’ knob to the ON,full counterclockwiseposition. The main burner will nowlight on the max flame setting.9. Turn main valve knob to the full‘ON' counterclockwiseposition.10. If the appliance will not operate, follow the instructions “To Turn Off” below andcall the Valor Fires Technical Helpline 0844 8711 565.To turn off.To turn the fire off press the ‘ON/OFF’ switch to the ‘O’ (Off position).CLEANING YOUR FIRETo maintain the high performance and quality finish of your fire please follow theseguidelines: Before attempting to clean the fire, please remember to turn off the fire and waitfor the appliance to cool completely. The fire will retain heat for some time beforecleaning can begin. If any pieces of debris are found in the convector box, have the chimney inspectedbefore further use.Fascia, Metal and painted parts. Clean the metal and painted parts with a slightly damp, lint free non-abrasive clothand then dry. Do not use abrasive cleaners, as these will scratch the fire surface.Removing and cleaning the window assembly.Removal of the window assembly is only necessary if you wish to clean the rear ofthe window or access the ceramic components. The window assembly can becleaned with a mild detergent and water. Glass cleaner can also be used. Any stainson the glass can be removed with a non-abrasive cleaner such as a ceramic hobcleaner. Never use abrasive cleaners. Clean the window carefully in accordance withthe instructions supplied with the cleaner.OWNER GUIDEFigure 7. Match location© Baxi Heating U.K. Limited 2009. Page 50