Valor Fires 940 Installer And Owner Manual

Contents

Valor Fires 940 Installer And Owner Manual Manual pdf 46 page image

Adorn model1. Remove the fascia (See section 17.4).2. Detach the rear bezel baffle and bezel by removing the two screws on the bezelbaffle.3. Detach the slide unit by removing two screwssecuring the plastic slide mechanism to the rear ofthe fascia (See figure 53).4. Replace in the reverse order.Decadent model1. Remove the fascia (See section 17.4).2. Detach the slide unit by removing two screwssecuring the plastic slide mechanism to the rear ofthe fascia – See figure 54.3. Replace in the reverse order.17.6 To replace the control slide button.Visage, Decadent, Eternal, Dream, Obsession andIcon models1. Remove the fascia (See section 17.4).2. Remove the control slide unit as in section 17.5.3. Detach the slide button by removing two screws (See figure 54).4. Replace in the reverse order.Adorn modelThe control slide button is not replaceable as a separate item, only as a completecontrol slide unit.17.7 To remove the complete burner unit.1. Remove the bottom front, fire front castings and the fascia (See section 17.4).2. Remove the ceramic fuel effect.3. Close the isolating valve in the inlet ‘T’connector. Support the inlet ‘T’ connectorto avoid straining the pipework anddisconnect the appliance from the ‘T’connector.4. Detach the burner unit from theconvection box by removing two screws(See figure 55).5. Replace in the reverse order.Page 46© Baxi Heating U.K. Limited 2009.INSTALLER GUIDEFigure 55. Burner attachment pointsFigure 54. Control slide &button fixings