Valor Fires 963 Installer And Owner Manual

Contents

Valor Fires 963 Installer And Owner Manual Manual pdf 20 page image

5. PACK CONTENTSThe items required for this appliance are packed in sections.Pack 1 - Fire unit contains:1 Heat engine.1 Hood (Dream model only).1 Louvre assembly (Petrus model only).1 Loose parts pack including: -1 Grommet for rear of convection box.2 Strips of floor sealing tape.6 Fibre / wooden plugs.4 Wood screws.2 Fire retaining cables.2 Cable adjusters.4 Eyebolts.1 Length of self-adhesive foam seal.1 Inlet “T” connector including pressure test point, nut and olive for 8mm inlet pipe.1 Alkaline 9V PP3 battery.1 Ceramic fuel effect pack (Not shown).3 No.8 x 3/8 screws (Black) for securing the outlet baffle.4 No.8 x 3/8 screws (Black) for securing the Dream hood.4 M4 x 25 screws for securing the fascia.2 Washers for securing the fascia.1 Smoke match tube.1 Outlet baffle1 Control knob2 M4 x 7mm screws for securing the control knob.Pack 2 - Petrus Fire front contains Pack 2 - Dream Fire front contains1 Fascia 1 Fascia1 Firefront casting 1 Firefront casting1 Front cover casting. 1 Front cover casting.1 Rear screen assembly. 1 Rear upper screen.2 Screws 2 ScrewsRemove all the items carefully to prevent damage. Take special care when handlingthe ceramic components. Some items may be contained in the packaging fitments -Examine the packaging carefully before discarding. Check that all the items arepresent and undamaged.Page 20© Baxi Heating U.K. Limited 2010.INSTALLER GUIDE