107Instruments, controlsAcknowledge warning messages asdescribed on page 98. Unacknowledgedwarning messages can be re-displayedlater.Warning messages:Remote ControlBatterycheckRemote control battery voltage too low –see page 32.Brakelight switchcheckFault. Brake light not illuminating whenbraking occurs. Have cause of faultremedied by a workshop immediately.If there is a fault in the lighting system, therespective location of the fault is displayedas text, e.g.:Brakelightcheck rightInterruption of power supplyStored warning messages appear on thedisplay one after the other.Warning buzzersWhen starting the engine or while driving:z If driver’s seat belt is not fastened.z If a door or the luggage compartmenthas not been closed correctly when youset off.z Once you have reached a certain speedif the handbrake is applied.z If a specified maximum speed isexceeded.z With Easytronic 3, if A, M or R is selectedwhile the engine is running and thedriver’s door is opened but the footbrakeis not depressed.z Warning signal sounds three times if theFlex-Fix system is extended 3 andreverse gear is selected.When the vehicle is parked and thedriver’s door is opened:z When the key is in the starter switch.z With parking lights or dipped beam on.z With Easytronic 3, if the handbrake isnot applied and no gear is selected whenthe engine is off.Brakelightcheck rightOKOfrecido por www.electromanuales.com