111LightingMain beam, headlight flashPush stalk forwards to switch from dippedbeam to main beam.To switch to dipped beam, push stalkforwards again or pull towards steeringwheel.To operate the headlight flash, pull stalktowards steering wheel. The main beam isswitched on for as long as the stalk is heldin this position.The blue control indicator C is illuminatedwhen main beam or headlight flash is on(see page 89).Automatic dipped beamactivation A 3Light switch to A: Dipped beam switcheson or off automatically when the engine isrunning depending on outside lightconditions.The exterior lights switch off when theignition is switched off.For reasons of safety, the light switchshould always remain in the A position.If visibility is poor (in foggy conditions, forexample) turn light switch to 9.Turn signal lightsPush stalk up or down to activate:After operation, the turn signal stalkreturns to its starting position.If the stalk is moved past the resistancepoint, the turn signal light remains on.When the steering wheel moves backtowards the straight-ahead position, theturn signal light is automaticallydeactivated.Move the stalk to the resistance point andhold for the turn signals to flash longer.Switch the turn signal off manually bymoving the stalk slightly.Stalk upwards = Right turn signalStalk downwards = Left turn signalOfrecido por www.electromanuales.com