260 Service, maintenanceWhen the engine is hot, the coolant levelrises; this falls again as it cools. If it shouldfall beneath the KALT/COLD mark, youmust top it up until it is slightly over themark.Top up anti-freeze. If no anti-freeze isavailable, top up with clean tap water. Iftap water is unavailable, distilled watercan be used.After topping up with tap water or distilledwater, have anti-freeze concentrationtested and add anti-freeze if necessary.Have cause of coolant loss remedied bya workshop.Too low a coolant level can cause enginedamage.To close, position the cap and screw it intoplace.Coolant temperatureControl indicator W illuminates whencoolant temperature is too high(see page 89). Check coolant level:z Coolant level too low:Top up coolant, observing theinstructions in "Anti-freeze and corrosionprotection". Have cause of coolant lossremedied by a workshop.z Coolant level OK:Have cause of increased temperatureremedied by a workshop.Brake fluidBrake fluid levelThe fluid level in the reservoir must beneither higher than the MAX mark norlower than the MIN mark.9 WarningBrake fluid is toxic and caustic. Keepaway from eyes, skin, fabric and paintedareas. Direct contact can cause injuriesand damage.Ofrecido por www.electromanuales.com
