Vega VEGAPULS WL S 61 Operating Instructions Manual

287 Set up Bluetooth connection with PC/notebookVEGAPULS WL S 61 • 4 … 20 mA54408-01-190806le App Store", "Google Play Store" or "BaiduStore" to your smartphone or tablet.6.2 ConnectingConnecting …Start the "VEGA Tools" app and select the func-tion "Setup". The smartphone/tablet searchesautomatically for Bluetooth-capable instrumentsin the area.The message "Searching …" is displayed.The found instruments will be listed on the leftside of the adjustment window. The search iscontinued automatically.Select the requested instrument in the devicelist.The message "Connecting …" is displayed.AuthenticateFor the first connection, the operating deviceand the sensor must authenticate each other.After successful authentication, the next con-nection functions without authentication.iOSDuring the pairing process, the following mes-sage is displayed: "Pairing request (Bluetooth),e.g. 12345678 wants to pair with your iPad".Press "Pair".AndroidThe coupling passes through automatically.Enter PINFor authentication, enter in the next menu win-dow the 4-digit PIN.Note:If an incorrect sensor PIN is entered,the PIN can only be entered again aftera delay time. This time gets longer aftereach incorrect entry.The message "Waiting for authentication" isdisplayed on the smartphone/tablet.ConnectedAfter connection, the sensor adjustment menuis displayed on the respective adjustmentinstrument.If the Bluetooth connection is interrupted, e.g.due to a too large distance between the two de-vices, this is displayed on the operating device.The message disappears when the connectionis restored.Change sensor PINIt is recommended to change the default settingof the sensor PIN to your own sensor PIN. To dothis, go to the menu item "Lock adjustment".After the sensor PIN has been changed, sensoradjustment can be enabled again. For access(authentication) with Bluetooth, the PIN is stilleffective.6.3 Sensor parameteradjustmentThe sensor adjustment menu is divided into twohalves:On the left you'll find the navigation section withthe menus "Setup", "Display", "Diagnosis" andothers.The selected menu item, recognisable by thecolour change, is displayed in the right half.Abb. 21: Example of an app view - Setup sensoradjustmentEnter the requested parameters and confirm viathe keyboard or the editing field. The settingsare then active in the sensor.Close the app to terminate connection.7 Set up Bluetooth connec-tion with PC/notebook7.1 PreparationsSystem requirementsMake sure that your PC/notebook meets thefollowing system requirements: