20 Device Description WAGO-I/O-SYSTEM 750750-464 2/4 AI RTD configurableManualVersion 1.0.13.2.6 Connections 2-Channel, 2-WireTable 8: Connections 2-channel, 2-wireFigure 6: ConnectionsConnection Designation Channel Function1 +R1 1 Sensor 1: +R2 -R1 --- Not connected3 +R3 --- Not connected4 -R3 1 Sensor 1: -R5 +R2 2 Sensor 2: +R6 -R2 --- Not connected7 +R4 --- Not connected8 -R4 2 Sensor 2: -RPower jumpercontacts +24 V --- Field supply 24 VPower jumpercontacts 0 V --- Field supply 0 VPos : 32 /Serie 750 ( WAGO-I/O-SYST EM)/Wic htige Erläuterungen/Sicherheits- und sonstig e Hinweis e/Hi nweis /Hinweis: Geschir mte Signalleitung en ver wenden! @ 7\mod_1265723251019_21.doc x @ 50140 @ @ 1Use shielded signal lines!Only use shielded signal lines for analog signals and I/O modules which areequipped with shield clamps. Only then can you ensure that the accuracy andinterference immunity specified for the respective I/O module can be achievedeven in the presence of interference acting on the signal cable.Pos : 33 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
