38 Function Description WAGO-I/O-SYSTEM 750750-632 Proportional Valve ModuleManualVersion 1.3.0, valid from FW/HW-Version 01/015.3.2 “Jog Mode”In this function, the I/O module changes the setpoint value until an applied signalis canceled. For example, a drive runs at a fixed speed in a fixed direction until acorresponding button is released.Figure 11: Jog ModeTable 24: Jog ModeNo. Event Description/Behavior1 Set SPL_EN to “0” “Jog mode” is activated.2 Present current level is maintained.3 Set JOG_POS to “1”Set JOG_POS to “0”Present current level is increased.Present current level is maintained.4 Set JOG_NEG to “1”Set JOG_NEG to “0”Present current level is reducedPresent current level is maintained.5 Set JOG_POS to “1”Set JOG_NEG to “1” Present current level is maintained.Do not exceed minimum or maximum values!As soon as the control value ±100 % has been achieved, no other change occurs.

WAGO 750-632 Manual