108 CoDeSys 2.3 Runtime Environment WAGO-I/O-SYSTEM 750758-874/000-110 WAGO-I/O-IPC-C6ManualVersion 2.3.011.5.6 Loading and Executing the PLC Program in Control(RS 232)Prerequisite:The simulation mode is disabled (Online > Simulation).You have connected the PC to the serial interface of the I/O-IPC via a null modemcable.1. Click in the menu bar on Online and select Communication Parameters ...The "Communication Parameters" window opens.2. To create a communication, click on [New…] in the "CommunicationParameters" window. The window for creating a new channel opens.3. To create a communication, click on [New…] in the "CommunicationParameters" window. The window for creating a new channel opens.Figure 15: Creating a new communication channel (RS 232) 14. Enter any name for your I/O-IPC in the "Name" field and click "Serial(RS232)". Then click [OK].5. Enter the IP address of your I/O-IPC in the "Address" field in the"Communication Parameters" window and then press the enter key on yourPC keyboard. To close the window, click in the window on [OK].To select an already created I/O-IPC, select it in the left window and thenclick on [OK].
