Wacker Neuson GPi 3200 Operator's Manual

Also see for GPi 3200: Operator's manual

Contents

Wacker Neuson GPi 3200 Operator's Manual Manual pdf 46 page image

Maintenance GPi 3200 / 430046 wc_tx001240gb.fm3.9 Storing the GeneratorWhen Follow the procedures described below if you intend to take your generator out ofservice and store it for at least six months.Tasks The following tasks must be performed in order to prepare the generator for storage:1. Drain fuel from the fuel tank.2. Drain fuel from the carburetor.3. Change the engine oil.4. Check for loose or missing fasteners; tighten or replace as needed.5. Clean the machine.6. Store the machine.Prerequisites Engine is stopped and cool to the touch Machine is on a level surface Fresh engine oil (see engine operator’s manual) Clean, dry shop cloths Plastic cloth and containers of sufficient volume to collect drained fuel and oilNote: Collect, store and dispose of drained fuel and oil in accordance with currentenvironmental protection regulations.Draining thefuel tankFollow the procedure below to drain the fuel tank.1. Place a plastic cloth and a collection container beneath the machine.2. Locate the fuel line (M4). Pinch the fuel line with locking pliers or a hose pincherand disconnect it from the fuel strainer (M).3. Open the fuel line and drain fuel into the collection container.WARNINGFire/burn hazards. Gasoline is flammable and can ignite or explode.f Keep all open flames, sparks, and cigarettes away from the machine whiledraining the fuel tank and carburetor.f Do not drain fuel while the engine is running or hot.wc_gr006814M4M