Wacom Intuos CTL-480 User Manual

Also see for CTL-460: User manual User manual

Contents

Wacom Intuos CTL-480 User Manual Manual pdf 24 page image

24IndexContents2424IndexContents24Contents IndexContents IndexADJUSTING TIP FEEL AND DOUBLE-CLICKTo adjust the feel and sensitivity of your pen and eraser, select the PEN tab.Tips:• Use a soft T IP FEEL for a wider range of pressure values in most pressure-sensitive applications.• In some applications a soft pressure setting can make the pen overreact so that slight pressure on thepen will be magnified on the screen. If you experience this, try a firmer T IP FEEL setting.• A large double-click distance may cause a delay at the beginning of brush strokes in some drawingapplications. This may also cause a delay at the beginning of a drag action or inking stroke. If younotice such effects, try setting a smaller double-click distance and using the side switch to double-click. You can also set an ExpressKey to double-click.TIP FEEL and E RASER FEEL customize theamount of pressure needed to click, draw, ink,or erase.To create broad brush strokes or to click with alight touch, use a SOFT tip setting. Formaximum control while drawing thin lines, usea F IRM tip setting.To set the double-click distance from thetablet, use the Tip Double Click Distanceslider.With your screen cursor positioned over anempty area of the control panel, press downon the tablet with the pen eraser. Use thepressure bar to determine how hard you mustpress on the eraser to reach maximumpressure.To set the functions for the eraser and side switch, select options from the dropdown menus beside the pen. Theselected function occurs when you bring the pen tip within 10 mm (0.4 inch) of the tablet surface without touchingthe tablet and then press the upper or lower side switch.Double-click on the pen tip to change the pen tip function. The tip must be set to C LICK in order to draw in mostgraphics applications.At least one tool button should be set to the CLICK function.You can change how the side switch operates for right clicks or other click functions. See Using the side switch.