Wacom Intuos CTL-480 User Manual

Also see for CTL-460: User manual User manual

Contents

Wacom Intuos CTL-480 User Manual Manual pdf 43 page image

43IndexContents4343IndexContents43Contents IndexContents IndexWIRELESS MODULE REMOVALTo remove the wireless module:1. Remove the wireless compartment cover.2. Use the spacer that came with the Intuos, your thumbnail, or a suitable, non-metallic tool to unseat themodule. To use the spacer, place it over the module and use it as a hook to unseat and slide the moduleout of the tablet.3. Place the spacer back into the wireless module slot.4. Slide the wireless compartment cover into place.5. Store the wireless module in a safe place after removal.BATTERY AND POWER MANAGEMENTThis section contains important information about the rechargeable battery and power managementfeatures of your Intuos tablet when used wirelessly. Be sure to review the following sections.Charging the batteryBattery and wireless connection statusPower saving featuresCHARGING THE BATTERYFully charge the tablet battery before using Intuos for the first time in wireless mode.Warning: See the Important Product Information document for safety precautions.Tips:• When charging, be sure that both the battery and the Wacom wireless module are installed in thetablet.• To check the battery charge status, open the Wacom Tablet control panel, click F UNCTIONS , andselect the WIRELESS tab. See Battery and wireless connection status.• Make the most of your wireless time. See Power saving features and Battery life information.Connect the USB cable between Intuos and a primary USB port located directly on your computer, or to a poweredUSB hub.• The battery charges whenever the cable is connected and the battery is not fully charged.• For everyday use, you can charge your battery in approximately 4 hours. To fully charge an empty battery ittakes approximately 6 hours. Actual charge time depends upon battery level and tablet use while charging.• USB connection deactivates wireless mode.Important:• When charging the battery, always connect the USB cable directly to your computer or to a powered USBhub. A non-powered hub may not provide enough current to charge the battery, which may affect overalltablet operation.• When your tablet is not connected to your computer via USB cable, you can charge the battery using astandard wall adapter with 5V output voltage. Quick charging will not work during this process.For more information, check the product information on the Wacom web site for your region.