Waldorf MicroWave II User Manual
                                                                                                                              | |
Contents
| 
If you are in Multi mode, there is a corresponding function to init a Multi program.You can select it by turning the page dial c one step clockwise again:Init Multi5. Briefly press the Utility key f while holding the Shift key k again.The selected program is now initialized.w When you initialize a program, all action takes place inside an edit buffer. Thereforeno data will be lost until you store the program.Editing Parameters on the MicroWave XTIn addition to the sound editing capabilities of the MicroWave II/XT/XTk, the XT featuresindividual control elements for most parameters. This extended user interface offers you acomfortable way of sound programming.DialsWhen turning a dial on the MicroWave XT panel, the corresponding sound parameter willbe changed. The parameter currently edited is shown in the upper right corner of thedisplay for a short period of time:If the parameter is already shown in the display, only the value change will be displayed.In the envelope section, you can select the active parameter set via the Env. Select button.When holding the Shift key k while turning a dial, the display changes to the page thatcontains the edited parameter. Instead of the Shift key k, you can also use the Sync keyin the lower left of the panel.ButtonsThe MicroWave XT features three additional buttons: Sync, Glide and Env. Select.• The Sync key enables or disables the synchronisation of oscillator 2. Its state is notshown in the display but via a dedicated LED next to the key. Also, when holdingthis key while turning a dial, the corresponding parameter page is called into thedisplay, as described above.Play Sound A001 | Mode [Cutoff 059]Saw Repeat WMF | Sound | 100Init Multi 001 Hit Me Bigga WMF ?[confirm with |
Related manuals for Waldorf MicroWave II
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine