Waldorf MicroWave II User Manual
                                                                                                                              | |
Contents
| 
Modifier DelayControl Delay Time0…127Determines the time for which the modulation signal is delayed.Sourcesee Table 3Selects the modulation source whose signal is used as input for the delay line.Modifier UnitsModifier 1…4Source #1see Table 3Selects the first source signal used for the calculation. Table 2 shows all possible settings.Source #2see Table 3Selects the second source signal when two sources are required for the calculation. Seedescription of modifier functions for further details. The possible settings are the same as forSource #1.Typesee Table 4Determines which kind of operation will be performed on the selected input sources. Thefollowing types are available:Table 4: Modifier functionsThe result of a modifier operation always lies within the range -1…0…+1. When it isassigned to a parameter in the Modulation Matrix, it is scaled to the range of the selectedparameter.Setting Description+ Addition- Subtraction* Multiplication/ DivisionXOR Exclusive OR functionOR OR functionAND AND functionS & H Sample & HoldRamp Triggered rampSwitch Switchabs value Absolute valuemin value Minimum valuemax value Maximum valuelag proc. Ramp functionfilter Low pass filterdiff. Differential functionSource #1|Source #2| Type |ParameterLFO1 |Control X| + | 025Control Delay Time | Source047 |FilterEnv82 User’s Manual MicroWave II • MicroWave XT • XTk |
Related manuals for Waldorf MicroWave II
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine