CHAPTER 14: Monitoring the Firebox Vclass366 Vcontroller5 Click Add when you are finished configuring thisprobe.The Select Probe window closes and the new probe is displayed inthe appropriate tab list.6 Repeat these steps to add more probes.7 Click Done when you are finished.To edit the settings of an existing probe:1 Select the probe and click Edit.2 When the Select Counter window appears, you canuse its features to switch counters as needed. If youneed to add a second counter to monitor a specificpolicy, you may need to click Add to create an newprobe.3 When the probe has been edited, test it by clickingShow Monitor (in the Real-time Monitor window) andthen click Start Monitoring to activate the graphicdisplay.To disable an existing probe:1 Click the tab for the probe you want to disable.2 Select the Enabled checkbox.The checkmark disappears. Disabling a probe is temporary; youcan re-enable a probe at any time.To delete an existing probe:1 Click the relevant tab for the probe you want to delete.2 Select the probe you want to delete and then clickDelete.Monitoring configured probesTo view the actual level of activity of all the listed probes inone of the tabs:1 Click the tab for the probes you want to monitor.2 Click Show Monitor.The Real-time Charts window appears.
